IPC-A-620 CIT Training
IPC A-620 Training for Instructor
The IPC-A-620 Training for instructors is a program centered on the IPC-A-620 Requirements and Acceptance for Cable and Wire Harness Assemblies, is the recognized document for wire and cable harness acceptance criteria. This standard, developed in conjunction with the Wire Harness Manufacturers Association or WHMA for short, defines the standard for cable and wire harness fabrication and installation. In this standard, the classes for the wire and cable harness product, as well as defined criteria, are explained through tables, charts, illustration, and photographs. In the instructor program, training students sitting to become full-fledged instructors will have to demonstrate their knowledge of the entire standard by successfully passing a written examination.
IPC-A-620 instructor certification class teaches the students about the describes the acceptability criteria for crimped, soldered and mechanically secured interconnections. The class also covers lacing and restraining criteria associated with both wire harnesses and cables.
The IPC-A-620 training for instructor program is an industry-developed training and certification program. It includes that includes training, certification, and instructional materials based on the IPC-A-620. Many IPC-A-620 instructors have been trained in this comprehensive program, IPC/WHMA-A-620 training and certification provides certified IPC trainers with high-quality materials and detailed instructional outlines which have been used for training CIS candidates. These candidates come from all walks of life in an organization from buyers to sales teams and management.
IPC A-620 Training For Instructor Program Benefits
Certification demonstrates the commitment to customer requirements and greatly facilitates certification to ISO certification or other quality assurance initiatives. By having earned this portable credential, you’ll receive immediate recognition, legitimacy, and value throughout the electronics industry.
Once instructors have been certified the IPC-A-620 certification program can be used inside a given organization. At this point, the firm can pick and choose, outside of a few general modules, what information all of the associates will be trained to. Most companies have a minimum a couple of instructors so that in the event one of them is busy the other can provide instruction.
While the IPC-A-620 training instructor program does not include any hands-on elements BEST Inc can add practical training on “how to” crimp, strip wire, lap solder and build harnesses. This instruction can be given an extra 1 to 2 days of hands-instruction depending on the information wanting to be learned. The culmination of the full hands-on training is how to build a complete wire harness using a blueprint and the components and then reading off a print to assemble the harness.
What’s in the class?
Module 1: Policy and Procedures
Module 2: Requirements and Acceptance for Cable and Wire Harness Assemblies and Applicable Documents
Module 3: Wire Preparation
Module 4: Soldered Terminations
Module 5: Crimp Terminations
Module 6: Insulation Displacement (IDC)
Module 7: Ultrasonic Welding
Module 8: Splices
Module 9: Connectorization
Review and Review Exercise
Module 10: Molding / Potting
Module 11: Cable Assemblies and Wires
Module 12: Marking Labeling
Module 13: Coaxial and Twinaxial Cable Assemblies
Module 14: Wire Bundle Securing
Module 15: Shielding
Module 16: Cable/Wire Harness Protective Coverings
Module 17: Installation
Module 18: Solderless Wrap
Module 19: Testing/Review
Instruction on CQI-test taking and administration of the program
How long does it take?
What do you get if you pass the IPC-A-620 Training For Instructor?
Everyone who successfully completes the program will receive instructional materials necessary for conducting Certified IPC Specialist Training:
IPC Certificate of Training
Certified IPC Specialist Exams
Course visuals on CD-ROM
Call BEST at 847-797-9250 for other class options